Zhongliang's export-oriented conveyor loader is sent to Ghana again

The customer's mine is a gold mine in Ghana, Africa: there are two roadways, one has a 4*4m working face with level roadway, we recommend ZWY-120 model, four-wheel drive, slag removal width range of 4 meters, loading compartment height of 2 meters , the loading length is within 4 meters, it can load about 10 tons to a truck.within 5-7 minutes.

conveyor loader ZWY-120

The other roadway is a 2.8m (height)* 2.5m(width) working face with a slope of 150 meters long and a gradient of 25 degrees, the bottom is a flat roadway. Although ZL Mining has a Crawler Scraper Conveyor Loader which is suitable for the slope of 25 degrees, but the slope here in this user's mine is only 150 meters long, in this case, a large crawler conveyor loader would cost too much, so we recommend our ZWY-60 Crawler Conveyor Loader.

Crawler Conveyor Loader

Zhongliang Crawler Conveyor Loader is suitable for the working condition of 2.2m wide * 2.5m high working surface with a slope of less than 20 degrees. After the slag is discharged, it only needs to use the power of the hoist to move back.

Crawler Scraper adopts double chain scrapers and is installed with an automatic winding reel which can wind up 50 meters, and it takes only 1 minute to fill a mine car.

Zhongliang has various models of conveyor loaders: small type conveyor loader, gold mine conveyor loader, slope conveyor loader, conveyor loader with scraper, coal mine conveyor loader, conveyor loader with breaker hammer.